BoaterEd Store      - Help Support This Forum - Join Today!      Hunting/Fishing Stuff
Save Password


Active Topics | Active Polls | Resources | Members | Online Users | Avatar Legend | Statistics
[ Active Members: 11 | Guests: 227 ]  [ Total: 238 ]  [ Newest Member: DonnaB ]
 All Forums
 Clubs - Organized Clubs, Cruises and Activities
 Sea Ray Owners
 Weep Holes
 New Topic |   New Poll New Poll |   Reply to Topic | 
Author Previous Topic: Sea Ray 220CC Topic Next Topic: Weep Holes  


RO# 30958

Posted - Aug 24 2017 :  14:40:34  Show Profile  Reply with Quote
What is the best way to clear blocked weep holes on Sea Ray 300?

Homeport: Freeport, N.Y.


RO# 24150

Posted - Aug 24 2017 :  21:24:52  Show Profile  Reply with Quote
Where are the weep holes and what size? Blow them out with air compressor? Can of compressed air like the ones used to blow dust out of electronics? Water hose?

Homeport: Sacandaga Lake Go to Top of Page


RO# 3300

Posted - Aug 27 2017 :  07:14:43  Show Profile  Reply with Quote
Yeah, gotta know where. The only weep hole that comes to mind is the one on the engine circulating pump.


There is much to be said, in a world like ours, for taking the world as you find it and fishing with a worm.-Bliss Perry, 1904

Homeport: Ca Go to Top of Page


RO# 17717

Posted - Aug 28 2017 :  01:59:53  Show Profile  Reply with Quote
If you're referring to the limber holes thru the stringers, etc that allow all compartment water to collect in bilge for bilge pump removal,
they are usually adequate size to ream out (gently to avoid gouging channel lining) with a screwdriver - maybe a Phillips -
or similar tool. Curvature of adjacent hull may make "angle" that prevents passing a long tool - then
bend a coat hanger or something similar to remove debris (often dropped screws, pieces of packaging, etc).
I doubt you can blow them out with air pressure if really blocked
Manufacturer usually can provide a diagram of locations, but you can feel them if out of sight or under bilge water
Hope this helps?

Homeport: Ft. Myers Go to Top of Page


RO# 2124

Posted - Aug 28 2017 :  10:53:16  Show Profile  Reply with Quote
such a generic question.... If you are talking about a floor drain to a through hull fitting, try a small plunger.

Favorite Quote: Don't sweat the petty things...AND...Don't pet the sweaty things!! - Steven Tyler

Homeport: Hudson River Go to Top of Page


RO# 30958

Posted - Aug 31 2017 :  21:22:52  Show Profile  Reply with Quote
Thank you all for byour suggestions.

Homeport: Freeport, N.Y. Go to Top of Page
  Previous Topic: Sea Ray 220CC Topic Next Topic: Weep Holes  
 New Topic |   New Poll New Poll |   Reply to Topic | 
Jump To:
BoaterEd © BoaterEd Go To Top Of Page
This page took 0.39 seconds to load
Forum Guidelines and Privacy Notice