BoaterEd Store      - Help Support This Forum - Join Today!      Hunting/Fishing Stuff
BoaterEd
Username:
Password:
Save Password


Register

Active Topics | Active Polls | Resources | Members | Online Users | Avatar Legend | Statistics
[ Active Members: 8 | Guests: 143 ]  [ Total: 151 ]  [ Newest Member: Robert Lamkin ]
 All Forums
 Forums
 Ask the Captain
 Volvo Penta or Mercruiser?
 New Topic |   New Poll New Poll |   Reply to Topic | 
Author Previous Topic: I did not know these boats could do this Topic Next Topic: RI Bill H7487  

jbacchi

RO# 18970

Posted - Feb 02 2006 :  17:11:32  Show Profile  Reply with Quote
Poll Question:
Which do you prefer?

Choices:

I will stick with Volvo Penta
I will stick with Mercruiser
Never had Volvo Penta but would like to switch
Never had Mercruiser but would like to switch
Either one will do
Neither

(Anonymous Vote)

Homeport: Lake Conroe,Texas

DogDaze

RO# 27009

Posted - Aug 02 2007 :  11:11:48  Show Profile  Reply with Quote
I'm a Merc Kid at heart.. on account of that is all I've ever had, and my brother's into the Fast Go scene..

I'd be open to Volvo's, but would need to do a sea trial first naturally. As for problems, I've seen what appears to be just as many Volvo issues if not more than Merc on the forums.. maybe that's cause there are more Volvos out there?? When it does come time to repair, I think the Merc repairs would be less costly than the Volvo repairs... (IMO)


Joe & Sheryl
The Great North Coast

1998 Cruisers Yachts 3575

Homeport: Cedar Point, Ohio Go to Top of Page

Msibley

RO# 16534

Posted - Aug 02 2007 :  11:25:47  Show Profile  Reply with Quote
quote:
Originally posted by Twin Buoys

The Bravo III has been the biggest culprit in damaging Mercruiser's reputation/reliability (I should know, I use to own a boat with a BIII unit).



This is a myth! The B3 drive is not the culprit...it's the company Mercruiser, themselves, in the way that they handled the complaints.

There was inadequate anode protection on the 1999-2003 drives, they knew it, and then exacerbated the problem by denying it and blaming the consumer for not taking proper care of the equipment.

That was a bad call on MerC's part.



Mike
"War is cruelty. There's no use trying to reform it, the crueler it is the sooner it will be over."
"I hate newspapermen. They come into camp and pick up their camp rumors and print them as facts. I regard them as spies, which, in truth, they are."
- Maj. Gen. William Tecumseh Sherman, Commanding, Union Armies-Military Division of the Mississippi

Homeport: Melbourne, FL Go to Top of Page

Flutterby

RO# 14378

Posted - Aug 02 2007 :  11:39:27  Show Profile  Reply with Quote
quote:
Originally posted by Art

Now of course I do have a dock mate who had a trim ram start leaking on his 3 year old Volvo. No repair kit from Volvo, you must replace the whole ram. How often do trim rams go bad?


I had one go out when my Merc was 3 yrs old due to corrosion. No zincs placed on the ram housing. Now those zincs are replaced as necessary and I've never had another failure.

BTW---the dealer was not going to install the zinc from the kit. I just happened to stop by while my boat was being worked on and insisted he install it. Then I had my SO install one on the other ram.

When I purchased my boat, I would have ordered Volvo if I'd had the choice.......



Edited by - Flutterby on Aug 02 2007 11:40:50

Homeport: California Sierras/Gold Country Go to Top of Page

KiDa

RO# 16492



Posted - Aug 02 2007 :  13:03:04  Show Profile  Reply with Quote
18+ month resurrection. That has to be close to a record.

VP all the way. If they ever get the quirks worked out of how to high power a composite drive w/o problems, I'm there too.


____________


Best Regards,

David
Saint Max
'99 330 Sundancer

==========

Capitalism is to this administration what Judaism was to the Third Reich.

-- Me

Homeport: Hopewell, VA Go to Top of Page

TomKat

RO# 25229

Posted - Aug 02 2007 :  13:28:18  Show Profile  Reply with Quote
I've had merc IO's for over 30 years. This winter I purchased a used boat with volvo drives. I love them, they shift better and smoother, have the water pumps where I can easily get at them, and seem to be just better built. I can't believe I'm saying these things but they are true and if I had to choose a new boat tomorrow it would have volvo drives. Tom


Homeport: Menasha, Wisconsin Go to Top of Page

The Other Gary

RO# 143



Posted - Aug 02 2007 :  14:25:31  Show Profile  Reply with Quote
Strange to see a post by Art up here.
Rest in Peace Art,






Gary Peck 1997 Bayliner 3988 MY, twin 330 Cummins

I saw a movie where only the military and the police had guns,,,,, It was called Schindler's List

Homeport: Toronto, Lake Ontario Go to Top of Page

NAWTICAL1

RO# 23427

Posted - Aug 02 2007 :  21:45:30  Show Profile  Reply with Quote
Volvo is way ahead. I would feel really disappointed if I had just purchased a merc.

I have volvos. The main issue is availability of parts and service.


2004 Regal 3860 Hard Top
"Sol Poniente"

FOR SALE
2004 Regal 3060
Twin Volvo 5.0 GXI, DP

Homeport: New Orleans, La. Go to Top of Page

cwms

RO# 7357

Posted - Aug 02 2007 :  22:30:24  Show Profile  Reply with Quote
It's a shame that Volvo will never get the market share they deserve. With 3 of the largest boat builders using outdrives all owned by Brunswick (SeaRay, Bayliner, Maxum), Merc has a very large captive market.


Homeport: VA Go to Top of Page

blouderback

RO# 24057

Posted - Aug 02 2007 :  22:39:04  Show Profile  Reply with Quote
Wow, I was very surprised to see how much Volvo is ahead of Mercruiser in this poll. Very surprising, given the marketshare that Mercruiser has - at least 70% based on a quick google search.

-Bob-
.................................................................
"Annabo": 2005 Larson Senza 206 w/5.0L Bravo III

Homeport: Chalfont, Pennsylvania Go to Top of Page

pdecat

RO# 842



Posted - Aug 03 2007 :  04:44:05  Show Profile  Reply with Quote
merc willnot get another nickle from me for any product.

Bruce



Homeport: Gulf Coast FL Go to Top of Page

PRKID787

RO# 27360

Posted - Aug 03 2007 :  15:26:21  Show Profile  Reply with Quote
Their diesel engines in sailboats are pretty bullet proof too. I've had the 3 cylinder and 4 cylinder versions in different boats, one, with the 4 cylinder diesel, semi-sunk by ahurricane where the motor and transmission was under sea water for a few days. After washing down with fresh water, Changing oil/filters and new fuel, no further repair was needed. it ran the 4 remaining years I had it with zero issue, and is still running, according to the new owner. As close to bulletproof as I've come to see. My previous experience with Volvo Penta's was a deciding factor in me purchasing my used Regal vs. a Sea Ray I was lusting after. The motor and outdrive experiences and ease of repair for me closely mirror those comments above.

PRKID787
2002 Regal 2860
Fajardo PR

Homeport: Go to Top of Page

something new

RO# 27103

Posted - Aug 03 2007 :  15:54:17  Show Profile  Reply with Quote
I constantly and consistently hear about how its not even close, VP over Merc. While I have to believe it (based on the number of votes by experienced boaters on this board), I must say that I have a 1985 5.0 Merc 230 and it runs very well. Even being as old as it is, it has been completely reliable and very easy to maintain with the number of stores that sell parts. It starts very nice, runs nice, and is very smooth. I have had a number of people compliment my boat on how well she runs for how old she is. Maybe the older Mercs were built better? I don't know, but I couldn't be happier with the performance and reliability of my Merc.

Anchor Point-Lake Erie
1985 Four Winns
Sundowner 225

Homeport: anchor point, lake erie Go to Top of Page

folieadeux

RO# 27326

Posted - Aug 03 2007 :  16:27:34  Show Profile  Reply with Quote
Volvo all the way over Merc. But when I move to a larger cruiser there are some other power plants that may gain a vote.

Neal and Barbara
Savannah,GA
"Olive or Twist" 2006 Meridian 391 T-Cummins 380QSB, Onan 9K

Homeport: Savannah.GA Go to Top of Page

jbacchi

RO# 18970

Posted - Aug 03 2007 :  16:33:27  Show Profile  Reply with Quote
I always go out of my way to ask boat mechanics which one they prefer. Their answers seem pretty consistant. Most common is how Volvo's break less often and are much easier to work on. Something as simple as changing the impeller on a merc can be difficult whereas volvo's are a snap. My first 2 boats had merc and although I never had any serious problems, I dont think I would go back. My volvos are rock solid and allow me to perform most yearly maintenance.


Homeport: Lake Conroe,Texas Go to Top of Page

RadioguyJ

RO# 9357

Posted - Aug 23 2007 :  08:05:28  Show Profile  Reply with Quote
quote:
Originally posted by The Other Gary

Strange to see a post by Art up here.
Rest in Peace Art,



Yeah I was thinking the same thing Gary. I noticed Art's old Doral is still for sale, still sad to see it on Yachtworld.

When exactly was it that Art passed?


Jason
2000 Cruisers Yachts 3375 Express
"American Beauty"
2002 Mercury 270 Sport Inflatable

Homeport: Miss-Croix Yacht Harbor, Prescott, WI Go to Top of Page

KnottyBuoyz

RO# 20406

Posted - Aug 23 2007 :  09:22:54  Show Profile  Reply with Quote
I'm currently looking at a $1500 repair bill for two bearings and a seal in a VP Duoprop that has kept the boat on the trailer for 5 weeks and ruined our holidays this year. I'll settle for a single straight shaft inboard from now on thanks very much!


Homeport: Go to Top of Page

snazzy

RO# 24043

Posted - Aug 23 2007 :  17:56:51  Show Profile  Reply with Quote
VP is the way to go. Had a merc and vowed to never get one again.

Dan
2006 Regal 2765
VP 8.1
"Sea-Esta Slacker"

Homeport: Siesta Key, Fl. Go to Top of Page

BobV1

RO# 22569

Posted - Aug 23 2007 :  19:00:22  Show Profile  Reply with Quote
Have to agree with the vast majority of responses. Volvo all the way.


Homeport: Beach Haven, NJ Go to Top of Page

Nautically Challenged

RO# 15645

Posted - Aug 24 2007 :  16:36:31  Show Profile  Reply with Quote
I met an interesting character last week while waiting for my wife at the marina. The guy came to launch his 23’ runabout at the ramp and I noticed that he started his engine way before he backed up on the ramp. The engine ran for at least a good 10 minutes while he was maneuvering his truck trying to get the boat straight in the water. He had a whole extended family sitting there watching the operation. After he finally got the boat in the water, without offending the guy, I approached him and politely started a small conversation and I said: “By the way, do you always start your engine out of the water?”. He looked at me arrogantly and said: “It’s a Volvo”.

I could not argue with that. "Way to go Volvo!”.




Harry
4 Play ** C
2400 Wellcraft Martinique

Homeport: Ft Lauderdale, Fl Go to Top of Page

marathon man

RO# 23428

Posted - Aug 24 2007 :  18:09:47  Show Profile  Reply with Quote
Volvo, starts great, runs great, no corrosion issues, won't sink with a hole in bellows, shifts smooth, much quieter than most Merc's.
No complaints.



Homeport: Ketchum, Grand Lake O' The Cherokees Go to Top of Page

JeffR

RO# 19718

Posted - Aug 24 2007 :  20:52:55  Show Profile  Reply with Quote
okay...can someone PLEASE explain the Merc bellows sinking the boat to me? I asked the same question in one of my posts in response to Pascal, and Pascal was humble enough to tell me that he thought that was still the case, but not sure. I have a Volvo currently, and I got a hole in my bellows which led to constant water in the bilge, and it ruined my gimbal bearing. I've asked "certified" mechanics this exact question and they tell me that a hole in the bellows can sink a Volvo or a Merc. Can someone please share the FACTS of what is different in this regard.

Also, Marathon, I always thought the consensus was that Volvo's were actually a little louder (one of their only downfalls) because of the addtional exhaust porting above the props. (?)



Homeport: Chicago, IL Go to Top of Page

jbacchi

RO# 18970

Posted - Aug 25 2007 :  09:07:47  Show Profile  Reply with Quote
JeffR, you are correct about water intrusion for both merc and volvo. Case in point, my buddy with twin volvo's had a tear in one of his bellows and the boat was taking on serious water. He had to have the boat hauled out immediatley for fear of sinking.


Homeport: Lake Conroe,Texas Go to Top of Page

LouC

RO# 10314

Posted - Aug 25 2007 :  10:04:53  Show Profile  Reply with Quote
Don't know about the older Volvos (270/280) as far as bellow issues, but the newer "American" Volvo drives{SX/DP} built here, in OMC's old factory, based partly on the OMC Cobra, have a bellows just like a Cobra, which is like a Merc and will let water in the boat if it leaks.

My choice, as long as I can get parts, is OMC ;)


1988 Four Winns 200 Horizon 4.3 OMC Cobra
1998 Jeep Grand Cherokee 4.0 Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi Quadradrive II

Homeport: Long Island NY Go to Top of Page

Thudpucker

RO# 10503



Posted - Aug 25 2007 :  10:18:54  Show Profile  Reply with Quote
I've only had older Merc's.
I would buy the one that can be dis-assembled when its older and has been in Salt water all its life.
That is NOT the Merc.



Homeport: AL. Go to Top of Page

RamSport47

RO# 28240

Posted - Aug 27 2007 :  20:02:47  Show Profile  Reply with Quote
Seeing all 3 brands at our dealership (OMC included) I would steer as far away from OMC as I could, and buy a Volvo. My current boat has Mercs, but not by choice...I'd prefer a coujple of V6 DuoProps over Alpha hogs any day!

Kenny
1998 Carver 310 Santego
T-Merc 350 Mag V-drives

Homeport: Cedar Point Marina, Ohio Go to Top of Page

gcirillo

RO# 17964

Posted - Aug 29 2007 :  16:26:34  Show Profile  Reply with Quote
I bought a used boat with a pair of 5.0MPI Bravo IIIs and have had NO problems, but I would prefer Volvos simply as a result of the feedback I have seen here and elsewhere. I think Merc knows that it has an inferior reputation, and they're obviously doing what they can; but it's an economic decision. They can probably do just fine selling the inferior product since they have the captive audience and big market share. Volvo, as the underdog, needs to innovate.

Thank goodness we have the competition. Can you imagine what Merc would be like if there were no Volvo?

PS: Merc's come a long way in recent years with engine "packaging" and simplicity.



Homeport: Mayo, MD Go to Top of Page

jbacchi

RO# 18970

Posted - Aug 29 2007 :  16:47:20  Show Profile  Reply with Quote
It still burns my ass that Merc would never admit to the notorious Bravo III corrosion issue. For that reason alone, I will never buy merc again. I recently had an issue with my Volvo outdrive leaking oil. Volvo stood by their product and sent me a brand new replacement.


Homeport: Lake Conroe,Texas Go to Top of Page

kalcris

RO# 8891

Posted - Aug 29 2007 :  17:12:41  Show Profile  Reply with Quote
Mercury has a brochure that lists about 20 points as to why they are better than Volvo, I saw it at a Searay dealer the other day. FYI


Homeport: Go to Top of Page

pokey354

RO# 16768

Posted - Aug 29 2007 :  21:00:57  Show Profile  Reply with Quote
VP outdrives...bulletproof...have mine 9 years in salt water...no corrosion or any other issues

john

Homeport: long island, new york Go to Top of Page

Nauset

RO# 23391

Posted - Sep 14 2007 :  13:56:31  Show Profile  Reply with Quote
I purchased a fresh water 2000 Four Winns w/5.7 Volvo I/O last summer. When we hauled it for the winter we discovered the drive anode completly missing. It was not disintegrated, but was not installed at some point. Aside from some pealing paint there was no damage or corrosion. A mechanic I spoke with said I was lucky it was not a Merc as it would be toast.

Four Winns 268 Vista
Lake Winnipesaukee, NH

Homeport: Lake Winnipesaukee, NH Go to Top of Page

C_Spray

RO# 898

Posted - Sep 14 2007 :  15:33:01  Show Profile  Reply with Quote
If the product really spoke for itself, they wouldn't need the brochure....

Life begins on the water.

Homeport: Port Deposit, MD Go to Top of Page

jbacchi

RO# 18970

Posted - Sep 14 2007 :  15:51:09  Show Profile  Reply with Quote
Mercruiser or Volvo?

This position paper is authored by Hoffmaster's Marina as a result of input from potential customers. It is NOT designed to be the final word but rather, an attempt at a conscientious and honest response to the most common issues in hopes of better-informing the consumer thus making him or her less vulnerable to misinformation.

Sterndrive Units
There are two brands of stern drives: Mercruiser and Volvo Penta. Cobalt and Chaparral use both. Boat builders that are divisions of Brunswick Corporation use Mercruiser sterndrives exclusively. Those builders include Sea Ray, Maxum, and Bayliner. Pretty much every other boat builder uses both brands. Volvo has a slight majority share of the market in the builders that use both makes of motor.

Back in the 1980's, Volvo produced its' drives in Sweden and parts were hard to get and expensive. Volvo changed that policy when it developed the SX and new duoprop drives in 1994 and 1997 respectively. The drives are now built in Tennessee. Parts are easily obtainable and competitive with Mercruiser, although still less available in after market brands. Volvo has a 72 hour parts guarantee in place and fills orders at over 95% of those requested. To counter the claim that Volvo has less dealers—it instituted a 24-hour service hot line for people to call in repair requests.

Volvo has an engine-mounted water pump on it's drives which the manual tells you to replace every year. A mechanic can do this for roughly $150. Mercruiser uses engine mounted water pumps on their Bravo series; the Alphas use a drive mounted pump. According to their service manual, pumps need to be replaced every two years. However, you can expect to pay a yard $375-$400 to replace the impeller on a Bravo drive and $500-$550 on the Alpha. The SX and duoprop drive impellers are user-serviceable. The water pump on the Bravo is not easy to service and on the Alpha you definitely don't do it yourself. This is not a laughing matter! Read this article for more info: http://www.cgauxinternational.org/news/news5.html.

Volvo SX has Cone Clutch shifting which is much more positive than the Alpha One's clutch dog shifting. Mercruiser uses the cone clutch shifting on it's BRAVO series drives. Volvo has a drive saver coupler which decreases the cost of repair in case of striking a submerged object. In many cases, damage to an Alpha One prop shaft will damage both the lower and upper gear sets. Many insurance companies won't pay to replace a gear set that visually is OK. The old set goes back in, only to fail later and strand the boater. On the other hand, you can strike an object hard enough to pop Volvo's coupler and have to get towed home where you might limp home with the Merc.

Mercruiser offers a BRAVO 1 Drive for standard prop sizes and higher top speed, and a BRAVO 2 drive with a very large diameter prop for really heavy boats. I would personally rather have the BRAVO 3 or Volvo Duoprop drive because the prop sets deliver so much thrust pushing the boat onto plane.

The duoprop has patented specially tuned props that deliver more thrust than BRAVO III and with much less cavitation.

Volvo now produces a drive with an external composite case. Although there is still metal inside the drive the composite takes 90% of the metallic surface away from the water. That makes the new drive very resistant to corrosion. So far we've had excellent results with the new drive, called an Ocean Drive, and recommend it for any application where the additional protection is worth the $1500-$2000 premium over a standard Duoprop. Mercruiser does not yet offer an equivalent drive.

For these reasons we tend to stock Volvo Penta drives on our boats although we order Merc powered boats for our customers who prefer it. The V drive boats we sell run about 50/50 Volvo to Merc.

Power Plants
Engine-wise the 2 brands are comparable. Some areas where one brand shines:
• 3.0L 135 PHP motor—Volvo has a much updated motor with a serpentine belt but Mercruiser still seems to have less cooling problems.
• 5.0L EFI—Volvo is rated at 270 HP rather than Merc's 260 HP but both are good motors.
• 5.7L EFI—Merc has a low output 260 HP motor that is very competitively priced. The Volvo has a 280. You can get a 350 Magnum Merc rb2rb2@gr5tgr5t300 HP but you pay a lot more for it. You can also get Volvo's 320 HP 5.7 or Merc's 6.2L motors. In my opinion, the best motor of all of these is the Volvo 280 HP duoprop or Ocean drive—low or no corrosion, great torque, great fuel economy trading for a slightly lower top speed. If you want more than that, go for either the Merc or Volvo 8.1L motors.

Although there have been changes in fuel consumption figures since the introduction of fuel injection, the following guidelines should be true for engines relative to each other. We have used these figures for many years and they seem to bear out:

Engine size
3.0 L 4 Cyl
4.3L V6
5.0L V8
5.7L V8
8.1L V8
Gallons per hour (Cruise)
3.5
5.5
8.5
10
14.3 Gallons per hour (Avg.)
2.3
3.6
5.6
6.6
9.4


Gallons per hour figures never change. Miles per gallon varies by the speed the boat goes at its' gallon per hour rating. For example, two boats have a 3.0. At cruise, one boat goes 30 MPH/3.5 GPH=8.57 miles per gallon. The other goes 25 MPH/3.5 GPH=7.14 miles per gallon. These gallon per hour figures are at roughly 3500 RPM. Average consumption is 2/3 of cruise consumption. It tells you how many gallons a boat if it runs so many hours over the course of a season. For example, the 3.0L powered will burn 2.3 x 100=230 gallons per 100 hours of use. Most people will use the boat 75-100 hours per year. We feel a person can run a gas motor at 75%-80% of wide open throttle all day long without hurting the motor.

What Power is Right For A Boat?
Generally we recommend the 3.0L for all around boating in a 2300 pound boat—bearing in mind that our customers have complained about the rough idle and weak torque. Use the 4.3L for 2500-2900 pound boats, and the 5.0 or 5.7 for 3000-5200 lb boats and the 8.1 for heavier ones. The 4.3 and V8 motors have better torque for ski take offs. The duoprop and BRAVO3 model drive are excellent also for this purpose. Fuel Injection provides easier starts and smoother acceleration but also costs a lot more so it ends up being a value choice for the consumer. Mercruiser has a fast start system to try and make the carb motors start faster but we recommend fuel injection over 21'. You should consider fuel injection in any range.







Homeport: Lake Conroe,Texas Go to Top of Page

Craig

RO# 142

Posted - Sep 15 2007 :  08:24:51  Show Profile  Reply with Quote
Sounds like a Volvo commercial rather than a unbiased comparison. Makes no mention of the Sea Core drive which is a competing product of the ocean series. My marina charges an hour labor to replace my B3 impeller. $375 sounds kinda high. I have had my merc for 8 seasons and never one issue with the motor. The drive I did have some corrosion before I added extra anodes. Since then no issues. I would own either if I liked the boat.

Craig Hollar
2000 Rinker 270
"Summer Home"



Homeport: Go to Top of Page

Cobalt 25

RO# 471

Posted - Sep 15 2007 :  21:53:15  Show Profile  Reply with Quote
Wait, let's get back to the Volvo guy on the ramp who ran it for ten minutes out of the water. I wouldn't want to run any water-cooled engine without coolant for ten minutes. Can Volvos really do that or was the guy wacky?

And by the way, after 29 years of Mercury products, I will avoid them at all costs in the future. There have been too many issues to get into.

Peter


Peter Haviland

Homeport: MA Go to Top of Page

patvital

RO# 26526

Posted - Sep 17 2007 :  15:07:52  Show Profile  Reply with Quote
Hi everyone,

I can't believe Google landed me to this thread.
This is great!
Just the right discussion I was about to post.
My scenario: I'm in the market for a used boat and came across a nice ( according to pictures ) 1991 Pursuit 2650 where the current Owner seem to have repowered the boat with a Merc 454 and kept the original Volvo Outdrive ( DP-C1 ).
I was skeptical about the whole thing until I came across this link.
Now, My question is : is it something that's common, meaning hooking up a Merc Engine ( for parts availability )to a Volvo penta outdrive? ( for better maintenance and reliability)
Or should I just stay away from this combination?
I leave in NY and plan to go inspect boat soon.

Any advise highly appreciated.

Here is link to boat:

http://www.yachtworld.com/core/listing/pl_boat_detail.jsp?&units=Feet&id=1751073&lang=en&slim=broker&&hosturl=capelookoutyachts&&ywo=capelookoutyachts&

Thanks guys!

Great site by the way!




Homeport: NY Go to Top of Page

AustinPaul

RO# 17353



Posted - Sep 17 2007 :  18:43:19  Show Profile  Reply with Quote
quote:
Originally posted by patvital

Hi everyone,

I can't believe Google landed me to this thread.
This is great!
Just the right discussion I was about to post.
My scenario: I'm in the market for a used boat and came across a nice ( according to pictures ) 1991 Pursuit 2650 where the current Owner seem to have repowered the boat with a Merc 454 and kept the original Volvo Outdrive ( DP-C1 ).
I was skeptical about the whole thing until I came across this link.
Now, My question is : is it something that's common, meaning hooking up a Merc Engine ( for parts availability )to a Volvo penta outdrive? ( for better maintenance and reliability)
Or should I just stay away from this combination?
I leave in NY and plan to go inspect boat soon.

Any advise highly appreciated.

Here is link to boat:

http://www.yachtworld.com/core/listing/pl_boat_detail.jsp?&units=Feet&id=1751073&lang=en&slim=broker&&hosturl=capelookoutyachts&&ywo=capelookoutyachts&

Thanks guys!

Great site by the way!



Hey there, and welcome! As this thread was started quite a while ago. you might want to start a new one with your question. I think you will get more responses that way.

Paul


*************************
"SNARE'D"

Homeport: Austin, Texas Go to Top of Page

jmcnab

RO# 30004



Posted - May 14 2008 :  21:13:12  Show Profile  Reply with Quote
Now this poll just goes to show that while most Mercruiser owners are out on the water more Volvo owners are here in the forum voting on their "brand". LOL.
sorry but us new guys have to reply to everything since it's all "new"!


'96 Carver 400 CMY
"2 Sirius"

Homeport: Great Lakes/Georgian Bay Go to Top of Page

Gregory S

RO# 2620



Posted - May 14 2008 :  21:30:23  Show Profile  Reply with Quote
Or else thy're in the garage stripping and re-painting those merc outdrives while the Volvo guys have time to spend on the computer.


Homeport: Norfolk, Va Go to Top of Page

boating_rob

RO# 21873

Posted - May 15 2008 :  09:21:12  Show Profile  Reply with Quote
Go Merc - There is a rumor that Volvo is discontinuing their OSI (Ocean Series composite) drives. OMC Part II.

30 Rinker "My Better Half"

Homeport: Haverstraw Marina, West Haverstraw NY Go to Top of Page

jbacchi

RO# 18970

Posted - May 15 2008 :  12:46:23  Show Profile  Reply with Quote
Rob, if that is true, I can certainly see why. Hmmm, lets see, so far I have have one OSI drive replaced, both bellows replaced (recall), one trim ram replaced, one faulty actuator and now an oil leak. The actuator and oil leak are to be repaired soon buts its costing me money out of pocket since I now fall under the extended warranty. I spoke with two different volvo techs and they both said the OSI drives are a nightmare. I will continue to support Volvo because they have, for the most part, stood behind their product and their motors are rock solid and easier to maintain.


Edited by - jbacchi on May 15 2008 12:47:15

Homeport: Lake Conroe,Texas Go to Top of Page

TIC

RO# 29813

Posted - Jul 19 2008 :  15:59:02  Show Profile  Reply with Quote
I dom"t know about others but my emngine is a chevy not a merc or volvo.My sterndrive is a volvo-penta DP


Homeport: PA Go to Top of Page

boating_rob

RO# 21873

Posted - Jul 21 2008 :  09:45:34  Show Profile  Reply with Quote
Allot of Volvo/Mercruiser engines are Chevy blocks but they are still considered Mercruiser or Volvo. If you have a Volvo Dual prop then your engine is most likely a Volvo Penta.

30 Rinker "My Better Half"

Homeport: Haverstraw Marina, West Haverstraw NY Go to Top of Page

capnjohhny

RO# 30764

Posted - Apr 16 2010 :  13:47:26  Show Profile  Reply with Quote
I have been working on mercs for a few years and like the product, but I have to say that customer service for Volvo- Penta products has been amazing for me.

I was on a delivery trip a few years ago. The boat was 450 Carver with Volvo diesels and a clamp broke on the exahust side of the turbo. Engine room filled with soot engines cut out Turbo overspun- you get the picture. The engines were a year out of waranty, but when I called and expalined what had happened to a "new" boat for the owner, Volvo paid for a new turbo and paid 3000 dollars to have the engine room detailed.

I was very impressed! I love my mercs though.



Homeport: Chazy River Go to Top of Page
  Previous Topic: I did not know these boats could do this Topic Next Topic: RI Bill H7487  
 New Topic |   New Poll New Poll |   Reply to Topic | 
Jump To:
BoaterEd © BoaterEd Go To Top Of Page
This page took 0.64 seconds to load
Forum Guidelines and Privacy Notice

    

Boatered.com