I have a 1997 292 regal . I have been using one of the rubber nozzle quick connects for the pump out for ten years now. Does any one know of someone who makes a threaded nozle that will fit this paticular fitting. Of the three sizes i have found on the market not one fits. I believe mine is 1 3/4 inch by 16 threads per inch.. Fine thread. Am i going to have to take the deck fitting out and replace it ? Thx for any help Chris
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Deck fitting /pump-out
- Thread starter regal292
- Start date
If the one Les has does not fit:
http://www.boatfix.com/catalog/598.pdf
Go to a Southern States, Agrisupply or the like and check in the irrigation department. That is where I got mine. Worked perfectly.
If you post this in the Sanitation section, somebody may have a different answer.
http://www.boatfix.com/catalog/598.pdf
Go to a Southern States, Agrisupply or the like and check in the irrigation department. That is where I got mine. Worked perfectly.
If you post this in the Sanitation section, somebody may have a different answer.
- Joined
- Jun 28, 2007
- RO Number
- 27046
- Messages
- 204
This a post that was on the old RO site, Les may have one like this
Noz-All Pumpout Adapter, 1-1/2 " Deck Fitting
Shopper Rating: Not reviewedRead/Write
Manufacturer MFG Part # WM Model# Price In Stock? Qty
SEALAND 310343502 150636 Only $12.99 USD YES
Noz-All Pumpout Adapter, 1-1/2 " Deck Fitting
Shopper Rating: Not reviewedRead/Write
Manufacturer MFG Part # WM Model# Price In Stock? Qty
SEALAND 310343502 150636 Only $12.99 USD YES
I had the exact same problem with mine. Just remove it and put in a new one. For some reason nobody seems to make that one anymore and even though I found several places that SAID they had it.................When I ordered it and it arrived............it was different. They"re simple to change. Usually three screws and the hose clamp at the other end. Takes about ten minutes.
Thx guys thats about what i thought. Tanqueray I have done the same thing. Guess i'll just replace it this winter. They are draining our lake and we have to pull our boat out for 5 months while they inspect the dam. At least that will give me some down time to do some over due projects.