Dinghy question

ccdjoe, I don't know of anyone who makes a semi dory dinghy of the size which might work for a dinghy on the boat like you have. However, it is very easy to make one--stitch and glue, using Brunzyl plywood, glass and epoxy. A good place to start looking is at Glen L kits and plans. Glen L has been around a long time. There are a number of boats there which can be scaled up or down, and make very good rowing/power boats. It would take one to two weekends to build one of these boats. Lots of options.

I grew up with a couple of home made dinghies--one 6 feet long, made of 1/4" plywood in 1932 and still going strong when my father donated it to the Sea Scouts in 1970. He then made an ultra light dinghy--about 6 feet long, but with a pram bow at the clamp and fine entry at the chine. This weighed about 25 lbs (hollow floor board which one sat on, no seats. Another was 8 feet long and we rigged with a sail, dagger board etc.
 
these little row boats are beautiful, but i hope that dog doesn't spot a bird or they'll all end up in the drink!! great little row boat for fun but a tender needs to be stable and easy to board. All 6 pax can stand in mine, move around, with no fear of loosing their balance... as a test, we once took a 1'+ wake on the beam with 6 adults on board, we barely rolled and no water came in

do i sound like Oldfishguy? :-)
 
Long before there were Avons & the host of inflatables there were dinghys that look like this one.

Untitled-27.jpg


I call it my 'which way' punt cause you never know which way the thing will try to throw you out if you do not step into the center of boat as you get in. Just a little tippy. However, it is an excellent rower, only weighs 80# & is a survivor of many altercations with rocks as the occupants pictured grew up. Bought it new in 1988. It is still going strong.
 
A neighbor found my missing dinghy about a mile upstream from my dock and up a drainage canal. Don't know if it was stashed for later recovery or what. Not damaged. Hard to believe wind could have blown it over my dock and then that far. Anyway it is now secure.
Actually I was a bit disappointed that it was found as I really liked the idea of replacing it with a hard side boat, probably a Livingston which I may go ahead and get anyhow. Thanks for all the comments.
 
I think the choice of a dinghy depends a LOT on how you plan to use it.

For some, the dinghy is a method of getting crew back and forth to shore from anchor. For this, I'd recommend an inflatable with electric motor. Inflatable carries the most people, and you're not going far so the electric is ideal (especially coming back from the pub at 1am!). Trying to row with many people aboard results in many sore knees, so the fact you can't row an inflatable worth sh*t isn't a concern.

For others, it's the "mothership" mode: take the Big Boat to a bay, then use the dinghy to explore nearby places, go fishing, etc. For this, you need an inflatable and fairly large (like 9.9hp) outboard, so you have more range.

For others, the dinghy is used to "play" in the bay. For this, you need a hard-shell that rows well (like a Walker Bay), maybe an electric and/or a sail.

druid
 
that minto row boat is nice, but with a base price of over $7,600 (oars not included), i think i'll pass.
 
joe;

your choice is governed by your goals here. if you want to move at speed you have to go with a dinghy that you can bring on board and those choices are fairly limited if you plan to stay with a 32' boat. if you never plan to be at speed in open water you can tow just about anything. i've never seen a towing rig that i would feel comfortable leaving out when the boat slows to manuver, have to draw it up tight. any kind of soft sided dink is going to make life easier and be more stable loading people in and out of. if dink performance is key, a RIB or traditional flat bottom tender is going to give you more speed. a RIB is an excellent comprimise but they get heavy quickly as the size goes up.
 
"Actually I was a bit disappointed that it was found as I really liked the idea of replacing it with a hard side boat, probably a Livingston which I may go ahead and get anyhow. "

but can a Livingston do this :

h13-l8.jpg


and more importantly, this :-)

h13-l6.jpg
 
Pascal; WOW! That's stability. . . and apparently a chick magnet. I'm past the second option but like the stability for creek fishing, etc. I believe you mentioned that you built it? Was there a kit/plan. Do you tow it? Is it for sale?
 
this one is my prototype, it's overbuilt and on the heavy side. No, no kits or plans, i've been thinking about building them for resale but havent'had a lot of time to really work on it. I rarely tow it since i have a crane and just lift it on the flybridge/hardtop. it's easier, it usually get it up or down in just a couple of minutes.

the real nice thing about it is the flat tops... they're great for boarding or stretching out when anchored off somewhere. The 11' is rated for 5 pax, 6 pax for the 13'
 
Well I'm impressed. I do a lot of Fly Fishing and lots of standing in the boat.
Getting in and out without tipping the dang thing is a problme too.
PascalG your boat looks good for that.
I dont want all that fleshy clutter in in the way when I'm out in my Fly Fishing boat though!
Or are you just ferrying camp Meat?
 
I callenge all of you to dinghy race at sunset at the marina!!!
 
Back
Top