For the past few years I have been losing OD lube from the monitor bottle; but only when I run at WOT (4500RPM). Not such a big deal as we normally cruise at 3000 to 3800RPM with no loss of lube. Never-the-less the loss of lube is a giant PITA. No white, chalky deposits on the OD, but evidense of lube on the outside of the bottle, the exh man below it and in the bilge. I installed the Simrek Halo drive shower on my Bravo 3 and have made two separate WOT runs, each 30 to 40 minutes long. At the end of each WOT run the level of the lube in the bottle was unchanged.
Simrek makes a damn fine product that does exactly as advertized, IMO!
Simrek makes a damn fine product that does exactly as advertized, IMO!