Engine not staying running

bikewhite

Member
Joined
Jun 3, 2007
RO Number
26601
Messages
4
I have a '88 Bayliner Saratoga with a 5.0 liter. The boat use to run ok, but now isn't running at all. I changed the points 3 times, put a new condensor and rotor in, new plugs. It's getting great spark, and I can see the fuel, it fires for a second, and then stalls?? I just filled the boat up on Saturday completely and added some fuel additives. The only thing I didn't check is the fuel water seperator filter. I also wanted to see if it would stay running on starting fluid. Does anyone have any suggestions? Also when boat was running before, it ran great without a load, but when I opened it up on the water, it seemed like it wanted to load up and go nowhere, but occasionally would take off running good. Getting frustrated quickly. Someone Please help!! Thanks!!!!!
 
It's just a WAG, but maybe there's water in the tank? I'd check the water separator filter before spending any money.
 
DON'T use Starting Fluid.
The stuff you buy in those cans at auto stores has little or no lubrication and I don't know it for a fact but I've heard from ALOT of old-time been at it a Looooooong time REAL Mechanics that there's something in that starting fluid that prolonged or overly large doses of it will wash the cylinder walls and create a compression problem.
 
DON'T use Starting Fluid.
The stuff you buy in those cans at auto stores has little or no lubrication and I don't know it for a fact but I've heard from ALOT of old-time been at it a Looooooong time REAL Mechanics that there's something in that starting fluid that prolonged or overly large doses of it will wash the cylinder walls and create a compression problem.


that is for 2 strokes only
u can use starting fluid

sounds like the key switch might be the problem
 
Just an idea, but I had a similar problem where the engine ran for 10 min and quit; wait 2 min and run again for another 10 or so min. The problem was spiders clogging up the fuel tank vent creating a vacuum and impeding the fuel flow.

Hope this helps
 
Back
Top