bayliner5806
Member
- Joined
- Mar 14, 2006
- RO Number
- 20518
- Messages
- 2
My boat was just put in the water it is a 2000 wit bravo III I notice a slight oil sheen when rasied or lowered. If I move the drive up and wait a sec the slight oil sheen goes away I can then move the drive back and forth and no oil sheen. When I move the drive down I can see an oil sheen right after but again if I wait a sec it goes away I can move drive back and forth with no sheen. Do to this I am guessing I have a leak in my hydrolick lines or cylinder. The only problem is I can not see where the sheen is comming from. Any Ideas?