Flatsflyer
Member
- Joined
- Feb 23, 2005
- RO Number
- 16388
- Messages
- 204
I have four (4) 75 gallon water tanks on my Trawler. One developed a leak on a recent trip to Key West. I've pulled the generator and water heater so that I could get the tank out. What I found was a "split" seam on one side of the tank.Has anyone had any luck with poly welding. The four tanks follow the shape of the hull so finding a replacement tank has been fruitless. I drop the tank off at a company in Ormond Beach, Florida that does Polymer Fabrications. They are in the process of repairing the tank. My question is has anyone else use anyone to do this type of work? Has it been successful?
There are plenty of outfits on the WEB selling poly welding equipment, but not many companies performing the actual work. I was wondering why normal welders don't provide this service?
Hopefully I'll get my tank back on Wednesday and will reinstall by the weekend. I also replaced the heating element in the hot water tank, there was no cleanout on the water tank (Raritan) so I decided to pull the element, glad I did because the 'crud" in the bottom and the element itself was quite in poor condition.
There are plenty of outfits on the WEB selling poly welding equipment, but not many companies performing the actual work. I was wondering why normal welders don't provide this service?
Hopefully I'll get my tank back on Wednesday and will reinstall by the weekend. I also replaced the heating element in the hot water tank, there was no cleanout on the water tank (Raritan) so I decided to pull the element, glad I did because the 'crud" in the bottom and the element itself was quite in poor condition.