Vacuflush Quit

Yeah, I've seen that more than once. A coat hanger works well for that kind of clog. Or a long handled screw driver used carefully.
 
time to improve the guest briefing procedure ! :-)
 
The reason the pump does not run with this type of clog is the seal is still tight and the pressure sensor does not activate the pump. The TP and whatever else keeps the vacuum level high. I agree with the thought that eventually the paper will dissolve and the system will activate. I had never experienced this problem before and the tech did bring a coat hanger but wanted to try more vacuum before getting his hands dirty.
 
You must log in or register to reply here.
Back
Top