300 Weekender

[BILL MORROCCO]

I'm looking for the folding rear seat leg hardware for a 1993 300 Weekender. Does anyone know where I can get these parts.
Thanks.

Bill

 

[Double D]

Like this ?

http://cgi.ebay.com/ebaymotors/Seat...c0.m245&_trkparms=72:1171|65:12|39:1|240:1318

 

[jtsmlarson]

This one is commonly used as well:

http://www.mcmaster.com/#1173a21/=1yqbcr

I don't know if the link is allowed, but the part number is 1173A21 and is available from McMaster for $3.09.

 

[BILL MORROCCO]

Thanks guys for the replies. The one from McMaster-Carr looks like what I'm looking for.

Bill

 

[jtsmlarson]

I had the same one on my 87 and 89 rear seats. I've sent that link to a lot of folks on a lot of boards! The only bummer is the original is out of a white nylon and the recent replacements are out of black nylon. It is identical otherwise.

 

[BILL MORROCCO]

Jim

The hardware looks good and I'm ordering that but do you know where I can get a leg for the seat.
Thanks.

Bill

 

[SCORPIO]

Just get some stainless railtubing and cut it to the proper length. Boatfix sells it in eight foot lengths I think. Local metal fabricators may be able to cut you sections to your desired specs.