Does anyone have a source for the fittings that are used on Carver boats? I have a 1995 Carver 325 Aft Cabin and want to do some changing and cannot seem to locate the same type of fitting the factory uses. Any advice would be greatly appreciated!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
325 aft cabin plumbing fittings
- Thread starter bajabruce
- Start date
I also have a 1995 Carver 325, and yes they are Flair fittings, but can be replaced by PEX as they use the same tubing. Check Lowe's for a good source of PEX fittings.
I ended up busting one of the elbows off, and did an emergency replacement with a PEX fitting from my local Lowes.
I busted it on a Sunday, and my first thought was OMG, where am I going to get one of these. But luckily I ran into a very informed guy at Lowes that was able to get me going.
I ended up busting one of the elbows off, and did an emergency replacement with a PEX fitting from my local Lowes.
I busted it on a Sunday, and my first thought was OMG, where am I going to get one of these. But luckily I ran into a very informed guy at Lowes that was able to get me going.