330DA Stantions

[Bliss]

Has anyone tightened or reseated these stantions?

 

[bob richards]

Yes, We took them off to replace the cutlass bearings. We used lifecaulk black to reseal them. The caulk that was on there came off pretty easy after we removed the stantions. I have a 97' 330DA

 

[Bliss]

Huh?

 

[SLW]

struts, stantions, you can caulk them both.

 

[bob richards]

Sorry, as SLW pointed out I was in a hurry and confused them, yes I was talking about struts and no I have not taken off the stantions.

I have been able to tighten some of them by taking the trim off the forward berth as there was a stain on the trim from the horn area leaking.

 

[BVasily]

Hello bliss.

I have tightened and sealed most of the stantions on my 330DA (95) but some were next to impossible to reach. Let me know if I can assist you in any way

Bob V

 

[Bliss]

Hi Bob, I just did the one near the radio. It was an all day job. I was afraid at one point I'd never get the carpentry level again. The guy who installed the cabinets on the starboard side must have had a good laugh