350 carver Mariner aft bench seat measurement

C

cjeccher

Member
Joined
Apr 29, 2010
RO Number
32109
Messages
107
Can another 350 owner measure the height of their aft bench Back Support?

I am having a seat cover made and I took all measurements except for that. My boat is 5 hours away and covered and I need the size. Mine is a 1998 Carver Mariner. Thank you.
 
I should be down at the boat sometime early this week. I will take measurements pics then if that works for you.

ms
 
Thanks Maxwell, that would be appreciated. I really only need the height of the back rest, from the top of the back rest to the seat cushion but to avoid confusion the pics would help. Thanks again.
 
Hi cjeccher,

I was down last night but forgot my phone to snap some pictures. The measurements that I took are from the top of the fiberglass to the center of the cushion. I used a set a flat piece of wood level on the fiberglass and measured down from there. I measured 17.5" on the sides and 18.5" in the center as the fiberglass has a bit of a curve to it. My cushion is 4.5" thick.

My boat is a 2000 350 Mariner.

Let me know if you have any questions.

ms
 
That is perfect, thanks Max. That was very nice of you to do that for me.
 
You must log in or register to reply here.
Back
Top