I have a 1990 270DA Sea ray I notice it leans to Starboard when tied up in the marina. The boat handle fine but I was wondering why it leans a little sitting. I havent added any equipment to that side of the boat or anything.Also there is no water in the bilge its pretty good I hardly ever have any water when i put on the bilge pump. Thoughts?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
90 270 DA List
- Thread starter mjkkemper
- Start date
- Joined
- Apr 18, 2007
- RO Number
- 25934
- Messages
- 34
Kemper,
My last boat was a '91 270 DA with a 7.4l BravoII outdrive. It sat level until I had a genset installed to the factory specs. MarineMax's solution was to A) add a second house battery (1 starting, 2 house, 1 gen, total of four) and to epoxy in a 40lb weight as ballast in the far rear starboard. It worked well and I still have the factory layouts if you need them. I am pretty sure the '90 and '91 models are laid out the same.
Dan
My last boat was a '91 270 DA with a 7.4l BravoII outdrive. It sat level until I had a genset installed to the factory specs. MarineMax's solution was to A) add a second house battery (1 starting, 2 house, 1 gen, total of four) and to epoxy in a 40lb weight as ballast in the far rear starboard. It worked well and I still have the factory layouts if you need them. I am pretty sure the '90 and '91 models are laid out the same.
Dan
Definately a Sea Ray thing. Funny thing is if you talk to the factory about it they make like it doesn't exist. Solution get a real mechanic and solve the problem. For me moving 2 of 3 batteries from Star to Port side solved the problem. Of course it costs you a chunk for the new long 0 gauge cable runs but it definately solved the list.
Harris
Harris