I'm a novice when it comes to marine air systems. Here's my problem...the raw water cooling pump won't come on when the salon A/C cycles on. I have two different units, one in the salon and the other in the aft stateroom. Both units are wired to the raw water pump by some type of board. This board has 110 power connection along with connections for the water pump and both A/C's. I wired the water pump directly to the 110 power and the pump runs. With the water pump wired to it's terminals when the main A/C unit cycles on the pump will not work. If I switch on the aft stateroom A/C the pump comes on. I assume the aft A/c is a slave to the salon unit since it will not operate unless the main A/c unit is on.
I would assume the circuit board is bad, but the aft A/C turns the water pump on. Could the board be bad and still operate the water pump with one unit and not the other?
Any ideas what to check would be appreciated.
I would assume the circuit board is bad, but the aft A/C turns the water pump on. Could the board be bad and still operate the water pump with one unit and not the other?
Any ideas what to check would be appreciated.