- Joined
- Apr 25, 2007
- RO Number
- 26018
- Messages
- 128
Ok, I hope I don't get laughed off the board for this but wiser men than me have always said the stupid questions are the ones not asked so here they go.
1. I have taken boater safety courses both online and classroom and have owned/operated small bowriders but nothing has prepared me for the docking and undocking of a cabin cruiser. Is there some advice out there on how to do this? We have been successful only when my son is onboard and able to jump on the pier and catch the boat. When it's just the Admiral and I it gets trickier. Almost to the point where she doesn't want to go out because we have to come back. We went out yesterday and the nest neighbor helped us tie back up (probably so we wouldn't hit his sailboat) and I still hit the shore power connection with the bow pulpit. It was always so much easier just reaching over and throwing a line on the cleat. I must note that our slip is subject to current which is an additional factor we deal with and it always seems to be pushing us away from the dock.
2. In a smaller bow rider, it was common and fun to jump the wake of other boats. Not so much fun with a deep v cruiser. I can handle the wake pretty well when idleing or a little faster but on plane traveling about 25-30 it's not so good bringing 6000# plus of boat out of the water. What is the best angle to take wake of another boat without dropping off plane every time I pass another boat?
Thanks in advance,
Jeff
1. I have taken boater safety courses both online and classroom and have owned/operated small bowriders but nothing has prepared me for the docking and undocking of a cabin cruiser. Is there some advice out there on how to do this? We have been successful only when my son is onboard and able to jump on the pier and catch the boat. When it's just the Admiral and I it gets trickier. Almost to the point where she doesn't want to go out because we have to come back. We went out yesterday and the nest neighbor helped us tie back up (probably so we wouldn't hit his sailboat) and I still hit the shore power connection with the bow pulpit. It was always so much easier just reaching over and throwing a line on the cleat. I must note that our slip is subject to current which is an additional factor we deal with and it always seems to be pushing us away from the dock.
2. In a smaller bow rider, it was common and fun to jump the wake of other boats. Not so much fun with a deep v cruiser. I can handle the wake pretty well when idleing or a little faster but on plane traveling about 25-30 it's not so good bringing 6000# plus of boat out of the water. What is the best angle to take wake of another boat without dropping off plane every time I pass another boat?
Thanks in advance,
Jeff