Bottom paint delay

Greg Schoenberg

Member
exMember
Joined
Feb 19, 2006
RO Number
20280
Messages
444
My 30' Carver bottom paint is on it's last legs. Furthermore, the spring haulout revealed a dozen dime size blisters. The boatyard recommended new BP and blister repair this Fall but I would prefer to wait until the annual haulout this Spring, vs. paying for two seperate haulouts.

FTR, the boat is in Puget Sound and it will be used sporadically during the winter, mostly 30 mile hops a few times.

Am I risking anything, structurally speaking?

-Greg
 
If I had blisters on my boat bottom and they weren't covered by hard epoxy paint, I'd be very concerned and get it taken care of properly.
 
The size and depth of the blisters will determine if they only have to be ground out and let dry for a short period of time or whether the dry out period is going to be substantial. If you need the bottom peeled to get down to good glass, you're going to have to leave the boat on the hard for the laminate to dry properly before the repairs can be made. Something to think about.
 
Back
Top