Correction!

seabug

Member
Joined
Aug 27, 2005
RO Number
18861
Messages
147
With regard to the 36' Trojan tri, I've learned that it is not '69, but 1979--all GLASS. The owner is rather old with poor eyesight, but very knowledgeable. I'm taking a more serious look at the boat now. It has twin Chryslers; I don't think parts would be a problem if and when needed. Thanks to you guys for your input.
 
A much better deal now that you know that it is NOT a 1969, which is the wooden boat. A well maintained all glass boat is a very good one. The asking price is still on the high side for that year of boat even in excellent condition. You should negotiate on the price and get a survey.
 
Pay particular attention to the reinforcing cross ribs on the vessel. Trojan construction was excellent overall but the drain holes drilled through the ribs were not always sealed. The ribs were constructed of plywood encased with fiberglass. The drain holes allowed water to access the plywood and eventually cause it to rot.
I had a trojan surveyed a number of years ago and the surveyor explained the above to me indicating it was aproblem with many trojans. The vessel flunked the survey due to the above problem.
 
Seabug-they only made about a bazillion of the Mopar small and big blocks over the years so parts are not a problem. You can get rebuilt blocks from the usual marine sources. My boat had 2 of the small block (318 I think) Chryslers they ran great (just like in my Dad's Windsor)and were pretty good on fuel. I would guess the big blocks would be a little more thirsty.
 
Mike - I think you're speaking of scupper holes that are located in various positions on the stringers. Anyway there was a survey done in May--but how comprehensive is yet to be seen. Thanks.
 
Back
Top