Depth Sounder Problems- Please help

Wishoot

Member
Joined
Aug 27, 2006
RO Number
22990
Messages
132
My depth sounder is freaking out. I can be in 100' of water and the reading will show 10'. I'll be standing completely still in the water in 100' of water and the alarm will go off. When cruising, the readings will jump all over the place.

Is there a good way of determining if the problem is with the transducer or with the receiving unit?

Thank you for your help.
 
I think the first step would be dis-connect the cable to the Xducer and watch the display for erratic behavior.

This is common. Your cable might be crushed or partially sheared from Jumping waves and somethng heavy coming down on the cable.

When you ask for help. Give us the piticulars on your boat, gear and location. All that helps.
 
Sorry about that. This is your typical, everyday, in-dash Faria Depth Sounder. It's mounted on the transom. It appears to be clean.

The boat is a 32' Regal Commodore with twin IB's
 
Many transom mounted transducers have a "kick up" feature. Check to see if it is all the way down and "clicked" in.
 
I had a similar problem, marine growth on the mount was letting it kick up just from the pressure of the water against it. I solved this by removing all the growth and painting the mount with anti fouling paint for transducers before lauching the boat, it's been working fine since then.
 
I have been wondering the same thing as you. I have a thru-hull sounder, and mine only works intermittently. It currently reads 2' no matter how deep the water. It worked fine at the beginning of the year. but did not work at the end of last season. I am also curious as to how difficult it is to replace the thru-hull sounder.
 
Back
Top