Electro San/Purasan Installation

Delaware Jim

Member
exMember
Joined
Oct 7, 2002
RO Number
10399
Messages
303
Vic, et.al.,
I've been seriously thinking about installing one of these units in my boat, but a few questions, please. I understand the units discharge overboard by "overflow" as a new charge from toilet enters. However, one question is the discharge thru hull - does it have to be at or above the waterline, or is a below waterline thru hull OK? My existing thru hull is well below waterline... will this make a difference?

Additionally, I have two heads, the aft unit about 15' from where the unit would be installed, while the other head is only 4' away. Does the 15' distance rule out a single unit for both heads? BTW, I have Jabsco 37000 series electric macerating heads currently.

In advance, thanks!

Delaware Jim
 
Back
Top