Enough Rode???

Woodsong

exMember
Member
exMember
Joined
Jan 29, 2006
RO Number
20095
Messages
2,559
This new boat owner wants to know if they have let out enough rode to anchor out. I thought BE might be able to help answer their question and make sure they are safe a night on the hook. I myself am not sure they do but I thought I'd open it up here for discussion.

EnoughRhode.jpg
 
Bill,
measured from the bow roller or the water surface?

:)
 
I don;t think they need to worry about dragging the anchor for at least another 6 hours.
 
I wonder if they called the dealer asking why the genny wasn't working...
 
If the generator had a closed cooling system fitted with a Grid Cooler, the generator would be working fine right now.
 
Let's see...... height of bow ~7', depth of water 0'. Scope in calm waters ~3:1. Heck he could get away with about 21' of rhode. It looks like backing off from the anchor could pose a problem, so just walk it out to where you want it. Great picture!

Jack
 
I would think he could have used another 30-40', just to be safe...
 
Pascal is going to have to give up the website name of Sandbarhopper.

The bottom paint is real shiny and the bow thruster tunnel is very clean.
It looks like there is a loop tied in the rode right before the bow cleat.
That knot is going to be real hard to undo.
 
Looks like a case of more money than brains to me.
 
L. Keith, yeah right, you see that kind of set up on these boats all the time (Uhhh Huhhh). I will say one thing, they got a real nice professional looking radar. They must be good mariners. All us good mariners have a touch of bad luck every now and then.
It is possible that, all joking aside, the anchor was put out post grounding. But anything's possible.

George
 
Ya think putting the anchor out was an attempt to "kedge off"??? That would explain the bar-tight rode!
 
There is no skid mark in the sand behind the boat.
There is no scum on the bottom of the boat.
It looks like it got there recently before the photo.
 
Or the tide just dropped and they didn't bother to check their depth before hand.
 
At least they won't have to worry about scratching off any bottom paint. They should be out there with wax and towels to take advantage of the opportunity.
 
Looks like he knows what he's doing. That boat ain't going anywhere at least for awhile.
 
George, Yea, it's a production boat, why do the systems right when it will be sold every two years.
 
Could be he had too much line out in a waterway with tidal change and unfamiliar territory.
 
Back
Top