first powerboat

JDaniels

Member
Joined
Mar 24, 2008
RO Number
29662
Messages
10
I was encouraged by another boatered member to start a new post regarding the purchase of my first powerboat, a 1986 Tiara 3600.

I started with a budget of $15k for a small boat I could trailer, before I knew it we were deciding to jump in with both feet and go for financing, and get a decent boat that the family could fit on with comfort.

We looked at quite a few boats at a bunch of marinas in our area, went to a boat show, looked online, etc. To make a long story short, after seeing a lot of duds, as soon as my wife got on the Tiara she said this is the boat! (funny how that happens)

My online research led me to a posting on boatered by a guy named Ernesto. The posting had to do with a 36' 1986 Tiara so I was interested to read it. As I read on, I realized this very Tiara I was thinking of buying was the subject of that posting. It was a great read, and I learned a ton. Ernesto passed on purchasing the boat, which left it available for me.

Well, the boat proved very clean and well maintained, and for a 20 year old the surveyor said she is in above-average mechanical shape (with the expected caveats).

The closing was this past Saturday morning, and we spent the weekend learning the different systems and enjoying meeting people at the dock. I can't wait to get her out on the water.

Of course, gas is going to be a killer this summer. Any one have any idea how much gas this boat will consume?
 
J-
Congrats on the boat and welcome to the Sound!

Tiara makes a fine boat so you went in a good direction.

How is she powered and what does she weigh?
 
Thanks Mint
Powered by twin Crusader v-8 350 HP with Borg Warner Velvet Drive transmissions. 1125 hours. Net weight is 16500.
 
Congratulations on your purchase.

You might want to splurge and buy a 2 year anchor with boatered. Once you enter NBR, there will be no turning back.
 
Welcome, Jack! You are related to Jack Daniels aren't you? LOL Enjoy that beautiful boat!
 
I would guess from my experience with those 454 Crusaders would be about 30 gph at cruise (3200 to 3400 rpm). GPH goes up real fast above that!
 
Congrats and welcome to the forum! Ernesto has his eye on an older regal at the moment but congrats on your tiara!
 
ha ha Woodsong.

JDaniels - Congrats! It's a beautiful boat!

As for gas consumption, probably not this boat's best attribute... expect 0.7 mpg at cruise based on the performance specs I got from Tiara when I was considering the purchase.

Good luck, have fun and post some pics when you take it out!!!

FYI -

Here's the info I got:

RPM MPG MPH
500 1.71 4.8
1000 1.52 6.7
1500 1.48 9.5
2000 0.91 11.3
2500 0.85 14.7
3000 0.58 21.8
3500 0.67 27.8
4000 0.68 31.6
4400 0.68 35.7
 
Congrats JD. I'm just down the way from you at Cedar Island Marina; going in the water on Thursday. See you on the sound!
 
Ernesto, should your second column be GPH [Gallons Per Hour]? Isn't that the standard for fuel usage comparisons of vessels?
 
Thanks Ernesto, that gives me a good idea of what we'll be burning. Flutterby, good point regarding GPH, you can multiply MPH by 1/MPG to get GPH. So, at 3500 RPM, for example, you would burn 41.5 gallons per hour. Yikes!!!

Tainui, so we are neighbors. I am looking forward to seeing you on the water.
 
Flutterby - It's pretty simple to calculate GPH from those numbers. Yes the chart I got also had GPH but I just got tired of typing... And it's a simple math formula so I thought it wasn't worth it.

I know many don't agree on this, but for me when I look at fuel consumption all I care about is MPG. That's because we do our boating based on distance. We go places, very specific destinations, and we know just how far those places are. If we were fishing, and planned our boating based on time, say go out fishing in open water for a certain amount of time (distance being a non factor) then I'd think of it from a GPH perspective.
 
JDaniels - to clarify, I just noted that my specs were for a 3600 Conv. Not sure if this was Tiara's mistake when they sent those to me or if they just tested the hull the same regardless of which topside configuration they used. Just contact them though, they'll be more than glad to find you a sea trial performance report that most closely matches your vessel.

You should post pics of that boat, it's one of the nicest cabins on a 20 year old boat I've ever seen.
 
JD - Based on my past experience with these motors in two very different boats, I would also guess at 28-30 gph at 3200 +/- rpm.
 
Well, we stayed down at the marina this weekend on the boat. Met a lot of very nice people Saturday night. Took the boat out this morning for my maiden voyage. I was a bit nervous about getting the boat turned in the tight quarters of the slips (for good reason). Zigged when I should have zagged and the boat momentum got away from me and I bumped our rail into a boat across the fairway from us, a big old Viking. Boy, do I feel terrible. I took a look at the damage to the Viking, a small chip on the pulpit. The owner wasn't there, so I emailed the marina and asked them to get me in touch with him, and that I would pay for any repairs, etc. I'll be down there this week as work allows and see what needs to be done.

Once we got out onto Long Island Sound I spent a couple of hours practicing using the engines only to steer around, spin and back up toward some lobster pot markers. I started to get a feel for it, but I know it will take time to master.

Coming back in, I took what I learned practicing out in the Sound and spun her and backed her in very slowly without a bump on anything or any other incident.

I will be practicing driving that big boat a lot more, away from other boats.

Any suggestions other than practice, practice, practice?
 
You have a few options. I would hire a captain for a few hours to help you speed up the learning curve. I'm sure there are some in yoru area availible. If not I know someone excellent in RI that may take the hours drive to Madison.

I woudl also get a copy of Chapman's, great instruction on how boats can be handled, will give yuo some ideas for thinsg to practice (how to use lines and the engines to help you fight wind and current) with that big a boat, you cannot fend her off by hand ( nor should anyone try)
 
Ditto on a few hours with a captain.
 
A boaters safety course from the CG Aux or Power Squadron would also be a good idea. You can also make alot of new friends in those organizations. Remember, Knowledge is power.
 
Back
Top