Hit some rocks

  • Thread starter Thread starter blouderback
  • Start date Start date
B

blouderback

Guest
While cruising the Delaware near the Trenton Thunder ball park last weekend, I was VERY SLOWLY idling up river looking for a good place to anchor out for lunch, and I found a BIG A$$ boulder about 6" under the surface. I was barely moving, so I was able to back up right away and minimize the damage.

Do these dings require more than good old MarineTex, or will MarineTex do the trick? One of the scratches is not deeper than the gelcoat, but 2 are into the fiberglass.

Here's the damage (hand in photo for size comparision):

 
Keep it out of the water, let it dry up. Dig out the loose stuff and repair with glass and gel to match. If the glass is not ripped up too bad maybe all you need is some gel.
Are you going to sell the boat some day?

Do it right.
 
Bob, I've posted a site in NBR which will walk you through the process, also, if you follow the instructions, they will give you your first batch for free!
 
Bob, thats my old stoppin (fishin) grounds. We had a saying "watch out for those floating rocks" Stay away from there its bad news and there is debri all over the place - always.

I was with a friend in the back creeks by the power plant on our wave runners and he hit a rock dead on. Punshed fist sized hole right in the bow. he tried to make it back to the ramp with the nose up but didnt make it. I towed him and his half sunk ski back to the ramp. We were kids then, they really gave it to us. LOL
 
Bob, I had to fix the same type of scratches on my old Marada. The repairs came out perfect, you couldn't even tell anything had happened. I just PM'd you the instructions.
 
Sorry to hear you found some rocks with your boat. On the positive side you could trade this one in for a bigger one now!
 
BTW Hogan, the second pic on the first step of mixing the gel wasn't clear. Can you update that pic?.
 
No problem guys, glad to be of assistance!
 
Bob, since it's below the waterline, I'd have it fixed professionally. I hit some rocks, hard, about 5 years ago and did a job on a brand new boat (literally new - the maiden voyage). I had it done by a pro and you would never know it happened.
 
he wont but the rest of us remember very well.
 
I saw the subject and the first thing I did was to look and see if Steve was the author! :-)
 
frankly being under the waterline i woudn't bother matching gel coat and woudl just use marinetex. jsut make sure there are no stress cracks around but at such low speed i doubt to did any damage beyond the cosmetics
 
quote:

Originally posted by PascalG

frankly being under the waterline i woudn't bother matching gel coat and woudl just use marinetex. jsut make sure there are no stress cracks around but at such low speed i doubt to did any damage beyond the cosmetics






My PM to Bob aside, this is exactly what I did with the Marada. Marine Tex and a putty knife, a couple of applications and some light sanding, and you couldn't tell anything had happened without looking very closely.

But for the record, it was the previous owner who had beached the boat on a rocky shore, not me.
 
That was a bad day. I remember the call from Brian on my cell phone: "Dude, what happened!"
 
Bob. Don't sweat it.

There are only two types of sailors: Those who have been aground, and those who will....

NorWester.
 
Back
Top