Jabsco Toilet Conversion

K

K Weaver

Member
Member
Joined
Mar 19, 2006
RO Number
20552
Messages
21
I have a Jabsco 29200-00120 toilet conversion kit and was having a problem with rinsing with the fresh water, not enough water coming in. I sent for and installed a rebuild kit this past weekend. Now sometimes when I flush the pump just runs and the water won't go out, wait a few seconds (3 to 4) hit the pump again and works fine. Try removing the new joker valve and installing the old and when I loosend the screws the pressure was like a garden hose.

Any suggestions.
 
Classic description of a plugged-up holding tank vent line. Check that first.
 
Thanks Vic,
However I checked the vent line and it is clear, no obstructions. Seems like when I flush the bowl it empties then when I rinse I have to wait for the water to stop moving before the flush will work agin.
 
Then there's goota be a clog or partial clog somewhere between the head and the tank. If you have a "Y" valve, that'd be a likely place to check.
 
Thanks Vic,
I have a shut-off valve a few feet from the head, I'll chack that this weekend.
 
You must log in or register to reply here.
Back
Top