Need a Recommendation for an Electronics Installer

A

awallach

Member
exMember
Joined
May 1, 2001
RO Number
4427
Messages
55
Need a Recommendation for an Electronics Installer

I just ordered a new Fixed Mount VHF radio. My existing RayMarine VHF210 is on it's last leg.
My issue is that the hole in the dash for the 210 is bigger than the opening i need for the new VHF.
I'm hoping the installer can route out some sort of plate to cover the gap. If it wasn't for the gap I might do it myself.
Thoughts, comments and recommendations?
 
Depending on the location Starboard works well for smaller radio's filling large older radios cut outs.
Bill
 
Your going to pay a crap load of money for no reason. An electronic installer is not what you need. Actually, that is not what you need ever for a VHF radio. You have a radio, so plug in the antenna, black wire goes to black, red wire goes to red. As far as the opening, get a friend or a carpenter to cut you starboard or something else to fit the hole you have.
 
Art, he can customize what ever u need . Top notch

Rob
 
+2 on the starboard that is what I used for mine as well.
 
You must log in or register to reply here.
Back
Top