Opinion needed on a Carver 370 aft cabin

  • Thread starter Thread starter PJ
  • Start date Start date
Dave I cannot even comment so sad.
I will list it with a broker in Charleson. I live 3 hours away from the boat and it is difficult to show it.
So I think the best thing is to list it with a broker.

I think spring is next week.
 
Best of luck I hope you sell as quick as I did but with out the bad luck that followed.
 
Very nice boat 370 Motoryacht...

Those photos look like you are in New Buffalo, Mi?
 
Thank you very much! Yes I am, I remember your boat when Jeff had it on D Dock, I am over on E behind where your boat was when it was for sale.

On a side note, does anybody know where I can buy the material for the dodger boards around my aft deck? I have one that has cracked during a boat parade and have not been able to find a new piece large enough for the life of me. Any ideas?
 
370;
I think you would benefit from trim tabs.
 
The first sea trail went very bad. Bad impellers over heated came back on one engine.
both impellers repaired and Sea trail today much better. Some work to do on one engine it has 50 rpm less at WOT. The technician is going to clean something out in the turbo and we will see if they will be equal.
We will close on Friday it is a done deal . I will make one more run friday.

The Name is still in question from the Poll I posted ocean maiden is winning but now my wife wants Ocean Maid. She will not decide until we file the documentation papers.

Thank you all for your help.

I am so excited about the trip back to Charleston It is so much fun to plan these trips

Have someone very interested in my 30 Carver hope to show it Saturday.
 
quote:
Originally posted by pdecat

370;
I think you would benefit from trim tabs.

Click to expand...


It was actually pretty rough that day, the pictures make it look like its flat. I barely ever run the boat with the tabs down, they are usually centered. Probably 3-4' close together Lake Michigan chop.

Also those pictures are at about 27 or 28 MPH, it was during a helicopter shoot and these were taken off of a friends boat.
 
quote:
Originally posted by 370 Motoryacht

On a side note, does anybody know where I can buy the material for the dodger boards around my aft deck? I have one that has cracked during a boat parade and have not been able to find a new piece large enough for the life of me. Any ideas?

Click to expand...


I used starboard. size was 3/8" I think. One thing is buy it local shipping would be very expensive.
 
I would like it to match what I currently have which smooth and and shiny. I have never seen starboard that looks like what I have.
 
370 what I got was shiny and smooth not the cutting board type. let me check on types of starbord and on your boat they be special lengths.
 
If you look at my pictures I need the port side dodger, there is a picture of the starboard side that I posted.
 
370
on my new boat they are all gone so I cannot check on size or thickness, they replaced with canvas looks thicker that my 30.
My mission for in the morning let me see, is the port side longer
 
quote:
Originally posted by pdecat

plastic shops have sheets in several colors

Click to expand...


Not around here, everywhere within a 70 mile radius has plastic very similar but its either much more transparent white or a different thickness. I never would have thought it would be this hard to find!
 
It is done!!!! I have taken delivery on the 370.
It has about two weeks of misc stuff to have done prior to my run from Jacksonville to Charleston. Then I am going to spend a week in Jacksonville to run the boat to become familiar with the handling and make sure I can avoid hitting stuff on the way up to Charleston.
My cruising motto is don't hit stuff and avoid drowning and have fun.
 
PJ,

Congrats!

Post pics!

BTW, check out Al's (awboaters) website, pretty neat stuff!

AJ
 
I have my New to me Carver 370 (OCEAN MAID) in Jacksonvill. I have been running for the past three days to learn the boat and will go back home tomorow.
I cannot find the switch for the helm lights the ones on the step to the helm and the one unde the seat. any idea of where the switch is?

i love the boat it handles so well, but go fast and it does like the fuel.
 
Mine are located on the dashboard I believe the 2nd or third switch down labeled courtesy lights. My top switch is a three way toggle for running/off/anchor lights.
 
You must log in or register to reply here.
Back
Top