Project Boat

Larry B

Member
exMember
Joined
Dec 23, 2001
RO Number
7053
Messages
249
I am looking for a woodworking project to last until I do not! Since I enjoy woodworking and boating I am thinking of buying a 1965 Thompson with a 120 OMC outdrive. I am treating it as though the engine and outdrive would need complete restoration. Does anyone know if parts are still available for this?
 
If you do get that boat, the OMC will likely be a problem.
I ran across a bunch of out drives I thought were OMC's, same color, but they were something more expensive. The guy thought they were better than anything out there.
Sam n Susie WIlliams in Guntersville AL. Phone 256 582 4904

Do you have photos of that Thompson. That was a Good boat.
The 120's were a good engine. I have some stuff left from my 140's that will fit.
The engine parts wont be a problem but you'll be a little bit shocked at the outdrive parts.
 
Think about an older Chriscraft. They have a good following. The clubs will know where to find most parts. You will have something of value when done. Some nice wood boats in Maine.
 
There is a Thompson group on the internet .. just Google Thompson. If you like woodworking the Thompson will be a good project, but I would plan on a new re-power rather than try and restore the OMC .. not worth what it would cost.
 
I am looking for a boat that will be original after I am through, providing I am ever done! The fact that the omc is not the best out-drive is not a concern because I do not expect to ever use it as a day to day boat. However I would like to be able to find many of the parts without digging through the salvage yards. The Older Chris Crafts and Century Resorters are not ruled out but the Thompsons are a nice old boat with a large number of admirer's as well. Still not able to post pictures as those that I have are from Craigs list and I don't know how to extract them!
 
You've been warned about the older OMC's. they have a large rubber diaphram on the transom (about 2'x1 1/2') that will disintegrate if exposed to UV(sun). That's not the only assinine design OMC came up with in the early days. They had kindergarten kids as engineers.

You're better off getting an in-board than any of those old IO's.

Don't start off in a hole.
 
Larry ... LISTEN TO THOSE WHO HAVE GONE BEFORE YOU!!! Unless you have already found a "project", look for a mid 50's outboard powered Thompson 16'. You can find a mid 50's outboard that will be original, have the fun of woodworking and restoring the boat without the headache of an outdrive that was a poor design to begin with. I did this with a 1960 Thompson Sea Coaster and had a ball. I am now working on a mid 50's 16' Lyman.
 
I am going to also look at a 1964 Thompson Sea Coaster (outboard) before I make my decision. This one looks to be better for me, if for no other reason than it will fit in my workspace better.
 
Larry, go for the Sea Coaster ... I'll see if I can did up a few pix of the one I did>
 
nice find. gotta love that advertisement....

FREE 46 Foot 1949 Chris Craft Cruiser FREE. Giant Wood Boat, needs an ubelievable amount of work, probably not restorable, would make a cool kids playhouse. Or set it next to your pond and play Gilligans Island.Has to go, must be moved by a professional boat mover.FREE
 
I had a 1953 32' CC that looked like that when I got it. It wound up in the burn barrel.
 
Unless you want a huge project, I would stay away from a Chris Craft Cruiser. How about a Classic Runabout or Utility? Here is a shot or two of my 17 foot Chris Craft '48 Deluxe in progress. There are a few of these around, so finding one would be easy. if you have woodworking skills and basic tools, this is a good project - but doable. The clubs are a great resource, and the people are more than willing to help.
Some of the pre-war barrel backs are becoming rare, and commanding a heafty price. These boats appreciate in value.

New 5200 bottom below, and Chris Craft (Hercules) K-95.

100_2619-50.jpg


100_2701.jpg
 
untitled.jpg

I wanted to see what she would have looked like in all her glory but the only image I could find was a thumbnail with a broken link. It's really ashame she'll probably end up firewood.
aV1StpO9.jpg
 
I have a friend that builds old cars and took on a 40' something Chris Craft. Came out nice but took 4 or 5 years
 
That old couple (the Williams) has a few old Herc's in shier shed. Complete engines with manifods. Those were good, reliable engines.
 
My '69 Concorde was free. It's taken five years to get her to 99%. I'm really really really glad that she's all fibreglass... I would also vote, run far away from that OMC IO. I'm also an Antique Outboard Club member. Lot's of '50's motors out there for that 16' Thompson. Good luck with your project.

Larry
 
Back
Top