Rear Bilge pump wiring question Voyager 320

W

Wintersux

Member
Joined
Jan 1, 2000
RO Number
2421
Messages
163
Removed rear bilge pump and switch. Putting in a rule and a new switch. I have a problem finding the right combo on the wiring. I need to know which wire goes where and which attaches to the switch. I have a pair of wires that are together that are black and dark brown and a separate light brown wire. Any help would be appreciated. I have tried lots of combos and have not found the right one.
 
There should have been a diagram with the new pump.
You may have gotten it right on one of your tries,
but if you got it wrong the first time, you may
have blown a fuse or breaker. Check your fuses first
then look at the paperwork that came with the new
pump.
 
Breakers did not pop. Circuit shows live at the switch. I just need the key to the wiring on the boat. I will just kill everything and the auto circuit should still be live.

The colors of the factory wiring are not familiar to me.
 
You must log in or register to reply here.
Back
Top