Running wires 2120 Destiny

[scanman717]

I need to run some wires from the back of the boat to the console. I found where the other wires are, but it looks like I need to remove the pads on the port side of the boat to get to the wiring channel.. I have no clue what they are called, but I am sure everyone knows what I am talking about.. Anyway, how do I remove those pads????

Thanks

 

[sugilbert]

Not a clue what "pads" you are referring to; but when you do get a path from back to front, do yourself a favor and add a decently strong string to the wires just in case you need to run more wires in the future.

 

[Nouchka]

A "rigid" single electricity wire can help maybe to run your wires in the wire channel ....

 

[scanman717]

All good tips about using lead ropes and stiff wire, thanks..
Here's a pic. I am talking about the "pads" around the sink in this pic.

 

[sugilbert]

No need to remove those pads. You MIGHT need to remove that speaker, though, just to grab or redirect the snake (You DO have a wire snake, right?). Most of the existing wires are within a tube running from the bilge to the helm. If it's filled, you'll need to follow the route of it.

 

[scanman717]

Thanks guys!! I did finally get it. Yes, I have a snake and ran it from under the console back, actually took out the battery switch door and had a bunch of room to get the wire tied up and out of the way of everything...