Looking for advice. I have two separate sounders. One is a Raymarine DSM300 interfaced with the RL80CRC unit that I have. The other is a Standard Horizon stand alone. The funny thing is, each sounder works great in isolation. But if I turn both on, the Standard Horizon reads a constant 15 - 17 feet while the Raymarine is fine. As soon as I turn off the Raymarine, the SH works great. Both transducers are on the same side of the boat and separated by about 1 foot. Anyone else ever seen this? I sure don't want to relocate a transducer to fix this if I can help it. Alternatively, I will just use one for a backup if the other is a problem. Any ideas?
Sounder interference
- Thread starter uncle ray
- Start date