transport

dreck

Member
exMember
Joined
Mar 4, 2009
RO Number
31099
Messages
10
looking for some insight on transporting (trucking) a boat from miami to baltimore. i believe that fuel cost and transport costs would be roughly equivalent whether i pay someone to truck it or move the boat myself up the icw. my question is which mode of moving the boat is likely to inflict more wear-and-tear.

some relevant details:

boat: fountain 48 express cruiser
loa: ~50ft
height: 16 ft from bottom of keel to top of electronics
beam: 12 ft
 
I think that would take a pro boat hauling co.
you would need over size permits and you would have to take every thing off the top to get it down to 13'6" high to clear road bridges.
and the road permits would probably only be for day lite hours only.
as for wear an tear I would think on the road would be more because it would be setting on a truck alot longer giving vandles a better shot at it.

woosterken
 
I mean the following comment in only the kindest, most benevolent way: What are you, nuts?

You have a 48' Fountain and you are thinking of over the road transport back to Baltimore? Com'on, take your family down to get that boat and make it a family adventure, or get a couple of your good boating friends together and go down to Miami and make the trip up the ICW and offshore where appropriate.

I obviously have no idea the extent of your navigational skills, but moving that boat will be a piece of cake and you'll enjoy a trip that you ordinarily would not take. Yes, stuff happens on a trip like that, but stuff happens to those who stay at home too.

Go for it!
 
well, get a quote from a hauler and do the math. Once you factor in the basic cost, permits, etc... i think that moving the boat on its own bottom will make more sense.

I think the risks of damage on the road are higher than driving it up yourself

at 100NM a day, it's under 2 weeks. Most of the ICW is unrestricted so you can probably do it in 10 days (1 week/2 week ends). all depends on your fuel burn.

and it is a VERY nice, memorable trip. the ICW is well marked and easy to navigate
 
1. Move it by water. 2. If you don't want to do it or feel uncomfortable of such a trip yourself, hire a captain. 3. If you need one, give me a call. I hold a 100 Ton Master License and have moved several boats over such a distance. :)
quote:

Originally posted by dreck




 
This topic has been discussed many times. IMO it boils down to 2 things:
- how much of the boat must be dis-assembled (and re-assembled) for transport?
If there is significant de- and re-rigging, the cost goes way up, not to mention the potential for damage or rainwater leakage during road transit.

- how much time and adventure can you afford?
Bringing a boat home on it's own bottom is an adventure in every sense of the word. It's also very dependent on weather and the owners timetable. A hired Captain helps tremendously to minimize the owners time committment as well as reducing the stress of running a new boat in unfamiliar waters.

For me, it was a no-brainer. I ran my Silverton up the ICW with the help of a Captain. It was an experience I'll never regret- or forget.
 
I'll second the comment regarding hiring a Captain and move it through the water. While I didn't purchase a boat in Florida and bring it to NJ, I did purchase my boat in Portland, Maine. Didn't know the boat or the waters so I hired a Captain to guide my buddy & I bringing it back to NJ. I was at the helm the entire time, but having the Captain gave us peace of mind. Especially so when we hit pea-soup fog on the way to Newport, RI after coming through the southern end of the Cape Cod Canal. Don't know what we would have done without the Captain's expertise. I learned quite a bit from that trip and have a great memory.
 
Just for the fun of knowing; does your boat have the triple Yanmars or the Mercruisers? Either way, that is one bad to the bone boat. In 2007 I ran one from Miami to Nassau. Man, what a ride. If you don't make the trip by water you are missing one heck of an experience.

quote:

Originally posted by dreck




 
You already know that your boat is capable of cruising at 40 or 45 knots all day long in six foot seas (assuming trip Yanmars). Unfortunately, you are limited in distance by its fuel capacity and, therefore, the amount of time that you can cruise unless you obtain fuel as the day goes by.

I would think that you would run offshore more that the ICW based upon the fact that she is more of an offshore performance boat at 48' with only a 12' beam, and she should be able to handle most seas that you would encounter unless there is a storm offshore that kicks up some seas or the wind gods have agita that day. Then you will, I would suppose, opt for running inside. And, with the Arneson surface drives, you will not have to be too concerned if the H2O gets a bit skinny because she is a relatively shallow draft boat.

Therefore, from Miami to Baltimore will take you all of three, to perhaps into your fourth day, and/or with bad WX offshore and if you have to use the ICW for great stretches at a time, then your ETA will extend by a day or two. If it takes you more than that, it'll be because you have taken your family, you are making it an adventure, and you are just "cruisin'" and taking in the sights, and that is not that bad at all.

Please let us know what you decide, or come back with questions?.....
 
ok ok ok!!! you guys make yoru points well.

yes its the triple yanmar 440s. we brought her down the icw last fall to miami but had a number of problems which required us to leave her at boatyards along the way.

however, now she seems to be in greeat shape, no problems over the last 30 hours or so.

if we don't break anything along the way, it should be a nice 3-4 day trip, even if we have to do it on the inside the whole way.

i had not thought of hiring a captain, but that is certainly an idea.

i did not realize that 13.5 ft was the limit. that makes the idea of taking her over the road much less appealing,

thanks for all your input.
 
Also keep in mind putting boat on a trailer adds about a foot and a half.
So you need to get it even lower.
Most boats are designed to be transported over land, so there is a way.
But I am with the rest of the group, drive it or hire someone to drive it home for you.
When I looked at hauling a boat, I was looking because there was no other way. It was land locked. But cost would be around $5k -6K for that trip, thats alot of fuel to burn on the ICW!
 
Oh, man, don't give up the opportunity to run your boat! Take a week's vacation, fly down on a Friday night, prep the boat all day Saturday, and start the trip first thing Sunday morning. In a boat like yours, I would run in the ocean as much as possible. You could take it liesurely, and still put 200-250 miles a day behind you. 5 days of boating tops, and your there. That leaves you 2-3 days to sit out bad weather.

Want some company? I'm cheap. $50/day plus expenses. I will be your first mate. I have no ocean or big boating skills, but I'm willing and eager to learn! BTW, I can cook and clean!
 
"run in the ocean as much as possible, and put 200 -250 miles a day behind you". Are you speaking from experience or just kidding Bob?
 
Gregory,

I wasn't kidding, nor was I speaking from experience. It was stated that he could cruise all day at 40-45 knots. Those Formula boats are designed for offshore. How long running at 40-45 knots would it take to put 250 miles behind you? 40 knots = about 45 MPH. 5 hours at 40 knots = 225 miles. Taking it "easy" at, let's say 30-35 knots, it'll only take him about 6 and a half hours to do 225 miles.

According to their website, a 48 will cruise at 50MPH, burning 1 MPG with those triple Yanmars. 225 miles in 6 hours a day is nothing, given the 470 gallon fuel capacity.
 
Boats are inherently intended to be run in water, not on truck beds. Your boat will be much happier running up the ICW!

Transporting it by truck will probably vibrate lose every single screw and electrical connection in the boat!
 
Sit down and watch Capatain Ron a few times. "If anything's going to happen, it'll happen out there..." How can you pass that up?? You WILL break something. Learning to fix what you break is part of the allure of boating. If you don't like that kind of thing, try basketball.. Have a nice trip.
 
Go out Government Cut. Take a left. See you in a couple of days.
 
quote:

Originally posted by KiDa

Go out Government Cut. Take a left. See you in a couple of days.





I know a guy who navigates that way.
Last I heard he was going to the Jersey Shore by "going down Delaware Bay for awhile and hangin' a left when I don't see land over there."
16.gif
 
5 or 6 hours a day of slamming into 4 footers isnt' a lot of fun and tiring for the crew... So much of the ICW is unrestricted it's probably not worth it especially with surface drives and no draft worries.

come and think of it, zipping thru all the twists and turns of the Ga ICW at 40 kts, that must be quite a ride :)
 
i am convinced. i didn't expect such an overwhelming response. the points about disassembly and banging around on the road makes me sick. however, having spent enough time banging around offshore, unless there is little to no seas. slaloming through georgia was definitely a highlight of the trip down.

thanks for all your comments
 
Back
Top