winterization

icon_speech_duh.gif
If everyone paid to have things done this forum would be useless.
 
1. Is your Volvo FWC or RWC? It makes a difference.
2. Have you read any of the postings on the "Winterization" forum.
 
Forgot to ask
1. Is your boat an IB or IO?
2. Is the boat in the water or out?
 
quote:

Originally posted by pgray1217

icon_speech_duh.gif
If everyone paid to have things done this forum would be useless.






The way you asked the question, no information in your description, lead me to believe you might be better off watching someone do it first before you try it yourself.
 
quote:

Originally posted by Robyns Nest

quote:

Originally posted by pgray1217

icon_speech_duh.gif
If everyone paid to have things done this forum would be useless.






The way you asked the question, no information in your description, lead me to believe you might be better off watching someone do it first before you try it yourself.









I'll second that!
 
That may just be the absolute best way to winterize a Volvo 8.1!
 
Somthing tells me we won't be hearing for pgray1217. It's a shame because with a little more info, he can get the answers he needs.
 
OK lets see if this helps. the volvo is a 2006 8.1 osi xdp.The manual only says to remove the 4 drain plugs an sea pump.Ive done a v6 for several years saving close to $1500 I would like to continue doing this myself for the comfort of knowing its done right . I prefer also using antifreze. What would you do?
 
I would put the 8.1L engine in a heated garage and not worry about winterizing
 
Since I don't know Volvo model numbers....as I asked above, is the engine FWC or RWC? IB or IO? In the water or out?
 
If the motor is freshwater cooled (you have green or pink antifreeze in the block and you have a heat exchanger) you can put muffs on the outdrive (provided it's not an inboard) and run pink antifreeze thru the saltwater side of your cooling system that way.

Maybe 4 gallons max, if you see strong color pink fluid coming out the back of the boat you are good.

If your boat is saltwater cooled it is a different procedure.

You will also have to stabilize the fuel and make sure it gets run thru the fuel delivery system before you go to the pink.

If you want to go crazy, you can pull the spark plugs out and squirt fogging fluid down each cylinder, then turn the motor over for a second.
 
quote:

Originally posted by pgray1217

Im not sure what fwc or rwc means?It is in the garage not heated. thanks






fwc=fresh water cooled

rwc=raw water cooled
 
OK pgray, does your engine have a closed cooling system similar to a car but instead of a radiator, you have a heat exchanger. That is a FWC (fresh water cooled) system. Just so you know, a fresh water cooled system has nothing to do with what kind of water you boat in. A closed FWC system has water/antifreeze running thru the engine just like a car. You still pick up sea water, but instead of it running thru the engine, it only runs thru the heat exchanger and cools down the antifreeze running thru the engine.

A RWC (raw water cooled) system picks up sea water and runs it thru the engine.
 
pgray1217,

Volvo-Penta OSI-XDP's are Volvo's Ocean Series, and the engine is FRESH WATER COOLED (anti-freeze mixture). Provided that you in fact have the OSI-XDP setup, there is a heat exchanger between the fresh and raw water sides. BTW, there is a sacrificial anode in the heat exchanger which is often missed when checking zinc wear.......this is something to be mindful of. That said, the heat exchanger, manifolds, and risers are the only parts of your system which utilize raw water. The intake and exhaust for the raw water side of the system is through the composite outdrives. This is the part you will need to winterize.

Good luck.
 
Here is my plan. I have been working on it this past month also. I'm sure I have some fine tuning to do. I have the marina do mine. I hope it helps!!!!

Engine:
1) Protect from freeze damage and fog engine
- Diesel Engines (Cummins TVD-CMD QSB 380 (V-Drives)
2) Disconnect the fuel hose and run the engine until it stops.
3) Use fogging oil to lubricate the cylinder walls and pistons.
4) Close all seacock’s and check rudder shafts and stuffing boxes for leaks.
5) Check the battery to ensure that it’s fully charged, clean terminals and make sure your charging system is working.
6) Check bilge pumps to make sure they are working and that float switches activate the pumps as they should and check that there's no debris.

Fresh Water System:
1) Thoroughly drain the fresh water tank..
2) Pump non-toxic antifreeze into the system and turn on all the facets (including the shower) and have them work until you see the antifreeze coming out of every outlet. (pink colored antifreeze is the safe product)
-Engine Room - Freshwater Wash down Spigots
-Transom - Freshwater Wash down Spigots
-Cockpit - Shower: Hot & Cold
-Cockpit - Wet Bar Sink w/ Faucet (Cockpit)
-Forward Shower – Starboard
-Forward Head – Port (Head System, VacuFlush®-
)Forward Head - Sink w/ Faucet
-Galley - Sink w/ Faucet.
3) Drain your hot water tank – Avoid having to fill the hot water tank with antifreeze by connecting the inlet and outlet lines together.

Head:
1) Pump out the holding tank
2) While pumping add fresh water to the bowl and flush several times.
3) Add antifreeze and pump through hoses, holding tank, y-valve, macerator and discharge hose.
3) Forward Head – Port (Head System, VacuFlush®)

Bubbling System:
1) If the water in the marina or dock freezes, the marina staff will be responsible for placing bubbling system around boat.
- Bubbler is located in Dock Box
 
Back
Top