- Joined
- Oct 7, 2002
- RO Number
- 10399
- Messages
- 303
As my fresh water pump is forward near the water heater, not near the aft tank, it will not re-prime after pumping water out and putting in a couple of gallons of pink AF into the tank. (FYI, I have to have 15-20 gallons of water in the tank to get the pump primed; it is not practical to put in that much AF...). My plan this year is to pump dry, then use compressed air to blow out all system from the tank forward. (Will also drain the hot water tank first). Should I worry about the residual drops of water laying in bottom of line freezing and causing issues?
Delaware Jim
Delaware Jim