Guys - got a call yesteday from the marina to move my boat in preparation for haul out (2003 280 Sundancer). Hadn't been there in about 3 weeks. Went down and found the boat had no power to start the engines. Last time I was at the boat (3 weeks ago), I disconnected shore power and took the cord with me. Figured I wouldn't need it. I'm puzzled because a) I had very little on in the boat that will kill the batteries and b) had the battery selector switch turned to "1" (have either "1", "2" or "both" and a separate "on" "off" selector for the house battery.
So, first and foremost, to start the boat, will plugging in shore power get me back up and running? Will I need to leave it plugged in for a while to charge the batteries or will the boat start off shore power?
Any ideas why all my batteries were dead? I switch the selector to "2" and "both" and used the manual override jumper at the helm and had no power whatsoever.
It's been somewhat cold here, but not terribly cold. Just lack of use?
Also, will shore power constantly charge my batteries when plugged in? I have a "AC converter" rocker switch in the 120V section of my panel - what does that do?
Thanks for the help guys - got to get the boat started tomorrow.
So, first and foremost, to start the boat, will plugging in shore power get me back up and running? Will I need to leave it plugged in for a while to charge the batteries or will the boat start off shore power?
Any ideas why all my batteries were dead? I switch the selector to "2" and "both" and used the manual override jumper at the helm and had no power whatsoever.
It's been somewhat cold here, but not terribly cold. Just lack of use?
Also, will shore power constantly charge my batteries when plugged in? I have a "AC converter" rocker switch in the 120V section of my panel - what does that do?
Thanks for the help guys - got to get the boat started tomorrow.