quote:
Originally posted by agriman
Thanks for the replies, I have removed the 4 screws holding the Jabsco regulator to the boat, but your right, Doral did not leave enough slack in the waterline to access the back of the device for removal. Perhaps if I disconnect the water line at the pump by-pass I can get some slack for removing and replacing.
Thanks again.
quote:
Originally posted by agriman
Can't figure this thing out. I went to the marina this weekend and had all kinds of pressure from the shore water hookup. I think the regulator must be sticking and should be replaced when I pull the boat this week for the winter.
quote:
Originally posted by Vic Willman
Replace the regulator, preferably in the spring before commissioning the boat - they aren't all that expensive.